Roboloading556

• Ross Usb Devices Driver Updater
• Ross Usb Devices Drivers

If your computer doesn't recognize your connected device, you might see an unknown error or a '0xE' error. If you do, follow these steps and try to connect your device again after each step:

1. Make sure that your iOS or iPadOS device is unlocked and on the Home screen.
2. Check that you have the latest software on your Mac or Windows PC. If you're using iTunes, make sure you have the latest version.
3. Make sure that your device is turned on.
4. If you see a Trust this Computer alert, unlock your device and tap Trust.
5. Unplug all USB accessories from your computer except for your device. Try each USB port to see if one works. Then try a different Apple USB cable.*
6. Restart your computer.
7. Restart your device:
8. Try connecting your device to another computer. If you have the same issue on another computer, contact Apple Support.
   

For more help, follow the steps below for your Mac or Windows PC.

Hi, I was advised by a Dell technician a while ago that it is recommended to download the latest device drivers from the Dell Support site to a USB stick before doing a clean installation of Windows 8.1. Should I download the drivers to my hard drive (c: drive) and then copy and paste them over to the USB flash drive. If drivers were not downloaded automatically by Windows Update, use Device Manager to refresh the driver from Windows Update, or contact the device manufacturer. I’m Moli, your virtual agent. I can help with Moto phone issues.

* Learn how to connect iPad Pro (11-inch) or iPad Pro 12.9-inch (3rd generation) to your computer.

If you use a Mac

1. Connect your iOS or iPadOS device and make sure that it's unlocked and on the Home screen.
2. On your Mac, hold down the Option key, click the Apple menu, and choose System Information or System Report.
3. From the list on the left, select USB.
4. If you see your iPhone, iPad, or iPod under USB Device Tree, get the latest macOS or install the latest updates. If you don't see your device or still need help, contact Apple Support.
   

If you use a Windows PC

The steps differ depending on if you downloaded iTunes from the Microsoft Store or from Apple.

If you downloaded iTunes from the Microsoft Store

Download silicon image driver. Follow these steps to reinstall the Apple Mobile Device USB driver:

1. Disconnect your device from your computer.
2. Unlock your iOS or iPadOS device and go to the Home screen. Then reconnect your device. If iTunes opens, close it.
3. Click and hold (or right-click) the Start button, then choose Device Manager.
4. Locate and expand the Portable Devices section.
   
5. Look for your connected device (such as Apple iPhone), then right-click on the device name and choose Update driver.
   
6. Select 'Search automatically for updated driver software.'
7. After the software installs, go to Settings > Update & Security > Windows Update and verify that no other updates are available.
8. Open iTunes.

If you downloaded iTunes from Apple

Follow these steps to reinstall the Apple Mobile Device USB driver:

1. Disconnect your device from your computer.
2. Unlock your iOS or iPadOS device and go to the Home screen. Then reconnect your device. If iTunes opens, close it.
3. Press the Windows and R key on your keyboard to open the Run command.
4. In the Run window, enter:
   %ProgramFiles%Common FilesAppleMobile Device SupportDrivers
5. Click OK.
6. Right-click on the usbaapl64.inf or usbaapl.inf file and choose Install.
   You might see other files that start with usbaapl64 or usbaapl. Make sure to install the file that ends in .inf. If you’re not sure which file to install, right-click a blank area in the File Explorer Window, click View, then click Details to find the correct file type. You want to install the Setup Information file.
7. Disconnect your device from your computer, then restart your computer.
8. Reconnect your device and open iTunes.

If your device still isn't recognized

Check Device Manager to see if the Apple Mobile Device USB driver is installed. Follow these steps to open Device Manager:

1. Press the Windows and R key on your keyboard to open the Run command.
2. In the Run window, enter devmgmt.msc, then click OK. Device Manager should open.
3. Locate and expand the Universal Serial Bus controllers section.
4. Look for the Apple Mobile Device USB driver.
   

If you don't see the Apple Mobile Device USB Driver or you see Unknown Device:

• Connect your device to your computer with a different USB cable.
• Connect your device to a different computer. If you have the same issue on another computer, contact Apple Support.

If you see the Apple Mobile Device USB driver with an error symbol:

If you see , , or next to the Apple Mobile Device USB driver, follow these steps:

1. Restart the Apple Mobile Device Service.
2. Check for and resolve issues with third-party security software, then restart your computer.
3. Try to install the usbaapl64.inf or usbaapl.inf file again.

STEP 1: Install Ross-Tech VCDS Software

DO NOT plug VAG-COM cable into computer yet.

Uninstall any other VCDS versions, if present on computer. Then delete c:Ross-Tech folder.

Install VCDS software. (Leave original installation path)

When install is complete, do not launch VCDS.

Exit the Installer.

STEP 2: Plug VAG-COM Cable Into Computer

Plug VAGCOM cable into any USB port.

Windows will install drivers automatically.

If driver install fails, skip to Troubleshooting.

STEP 3: Disable Internet & Launch VCDS Software

Golden Rule: Must disconnect from internet everytime before launching VCDS, else will say 'Interface not found'. Also, do NOT update the software.

Read golden rule above?If yes, then..

Launch VCDS software from Start Menu. Or from C:Ross-TechVCDSVCDS.exe

Go to: Options » Test (leave it as USB)

It should show 'Port Status: OK':

Click 'Save'.

You're now ready to safely scan your car!

STEP 4: Disable Update Nag on Startup

Start > Startup > Right-click 'RT-Updater' > Delete

Troubleshooting:

You are here because when you inserted VAG-COM cable for first time, Windows failed to install drivers properly.

Expand:

SOLUTION 1:

Leave cable connected to computer. Restart computer. It should be fixed now. Go to Step 3.

Sealevel driver download for windows 10. SOLUTION 2:

VAGCOM cable should be connected to computer.

1) Go to Control Panel.

• Windows Vista/7/8/10: Control Panel » System » Device Manager
• Windows XP: Control Panel » System » 'Hardware' tab » Device Manager

2) Expand 'Ports (COM & LPT)' or 'Universal Serial Bus Controllers'.

You're looking for a device that has name 'Ross-Tech' in it. It will have a yellow mark next to it like this:

Here's an example: OR it may show as 'Ross-Tech Direct USB Interface'.

3) Right-click on this device with the yellow mark » Update Driver Software.

4) Choose 'Browse Computer for Driver Software'.

5) Browse to: 'C:Ross-TechVCDS'. It should look like this:

6) Click 'Next'. When you get below message, choose 'Install this driver software anyway'.

When driver installation is complete, disconnect cable from computer. Restart computer.

When you're back in Windows, you may connect cable into computer, and go to Step 3.

SOLUTION 3 :

If after SOLUTION 2, cable is still showing a Yellow mark (), then you're likely on Windows 8, 8.1, 10 or above.

In this case, disconnect cable.

Ross Usb Devices Driver Updater

And disable driver signature enforcement. Here's how: Windows 8/8.1|Windows 10

When done, go to Step 3.

Notes:

Ross Usb Devices Drivers

• DO NOT update the software to latest version, else it will not work. Only works on current version.
• If you bought your VAG-COM cable from us, then registration is not needed. It's already registered/licensed.