Olimex Driver

23-04-2021 by



Hi community, I have a problem getting the Olimex ARM-USB-OCD-H to work on Windows 10 with an esp32. I’m somewhat sure that it is a driver issue. First I followed the instruction from the platformio website. 1- Download the OLIMEX drivers. 2- Plug the OLIMEX JTAG to your computer and go to “Device Manager”. 3- Try to update the drivers. 3bis- If it doesn't work, disable the driver signature enforcement. 4- Open Code Compiler Code Studio to test if everything works well. 5- Work on the robot. Download the Olimex drivers.

Supported

Armbian Buster
mainline based kernel 5.10.y

Server or light desktop usage scenarios.
High level of software maturity

Armbian Bionic
mainline based kernel 5.10.y

Server or light desktop usage scenarios.Driver
High level of software maturity

Specifications

Olimex Openocd Jtag Driver

* Specifications differ from hardware revision, model and software support level

FAQs

We provide CLI (command line interface) images first. If the software is stable enough we add the option to upgrade to XFCE desktop. The Build-System relies on Debian and Ubuntu. The availability of different images may vary, most of the time because of driver restriction. Sometimes we provide only testing images. All images can be built from sources at any time and in rare cases, where you can't find an image which you need, you can build one.
Preparation Make sure you have a good & reliable SD card and a proper power supply. Archives can be uncompressed with 7-Zip on Windows, Keka on OS X and 7z on Linux (apt-get install p7zip-full). RAW images can be written with Etcher (all OS). Where images are compressed with .xz you can wrtite them to the SD card with Etcher directly. Boot Insert the SD card into the slot, connect a cable to your network if possible or a display and power your board. (First) boot (with DHCP) takes up to 35 seconds with a class 10 SD Card. Login Log in as: root Password: 1234. Then you are prompted to change this password (US-Keyboard setting). When done, you are asked to create a normal user-account for your everyday tasks.

Tested 3rd party hardware

Network printer

Laserjet M252

600 dpi

DVB tuner

S960 V2

USB2.0

4G via USB-A

Huawei ME909s

150d/50u Mbps

Olimex

HDMI display

Iiyama Prolite

1920x1080 touch

UART

CH340G

USB2.0

USB Bluetooth

CSR

Olimex Drivers Test

USB2.0 / v4.0

Olimex Driver

USB Ethernet

AX88772A

USB 2.0 / 100Mbps

Driver

USB WiFi AC

8811au

USB2.0 / 433Mbps

USB WiFi AC

8814AU

USB3.0 / 1300Mbps

Olimex-ftdi-drivers-2-12-04

USB WiFi AC

MT7610

USB2.0 / 433Mbps

USB WiFi

RTL8188EUS

USB2.0 / 150Mbps

USB WiFi AC

RTL88x2BU

Olimex Drivers

USB2.0 / 867Mbps

Recommended download

Builds were tested for booting and basic operations.
VariantEUUSAAsiaTorrentUser spaceKernelIntegrity checkSizeLast modified
Bionic stable5.10.ySHAASC217MFeb 4 2021
Buster stable5.10.ySHAASC281MFeb 4 2021
Focal stable5.10.ySHAASC227MFeb 4 2021

Test builds

Builds were made automatically from the trunk with unknown support status. Use at your own risk!
VariantGlobalChinaTorrentUser spaceKernelIntegrity checkSizeLast modified
Hirsute n/an/aunstable5.10.15SHAASC241MFeb 12 2021




Download Silicon Chip Port Devices Driver
Quatech Driver

Comments are closed.